|
 HOUSTON, TEXAS. August 8, 2006- FOR IMMEDIATE RELEASE Download PDF
Download High Resolution Image Resilon-T™ X515 is certified by the Federal Institute for Materials Research and Testing (BAM). The internationally accepted BAM certificate assures material safety in gaseous oxygen service. X515 is approved from the German based BAM group for temperatures up to 350°F and pressures up to 2900 psi. “Most reciprocating oxygen compressors operate at significantly lower temperatures and pressures than the maximum allowance,” says Jim Rauh, Polymer Products Marketing Manager for CECO. Resilon-T™ X515 offers competitive performance without the use of lead fillers. “Many industry experts consider lead an environmental and health hazard,” says Rauh. “Safety is a top priority at CECO, both for our employees and our customers, so we have developed X515 with that in mind.” Although oxygen environments inhibit the formation of PTFE film, Resilon-T™ X515 relies on the oxidation of several proprietary fillers to provide excellent lubricity, reduced coefficient of friction and low wear rates. In addition, X515 is not abrasive to the counterface, including cast iron, hardened steel or special coatings like tungsten carbide. Many glass filled grades exhibit low wear rates, but are highly abrasive to the mating surface. Resilon-T™ X515 is available oxygen cleaned and packaged to several industry standards including GS-38, Class AA as well as ASTM and Compressed Gas Association specifications. CECO stocks X515 in a variety of sizes for immediate manufacturing. Please consult with your CECO sales representative for recommendations for your specific operating conditions. Compressor Engineering Corporation (CECO), headquartered in Houston, Texas, was founded in 1964 and has grown to become the world's largest independent manufacturer of compressor and engine replacement parts. In 1977, CECO opened its New Orleans warehouse and sales office, and in 1980 added a sales office, warehouse, and repair center and in Odessa, Texas, which expanded again in 2002. Precision Repair - Baton Rouge was launched in 2003. Custom engineered components and repair is only a portion of CECO's solution packages. They also provide customized software solutions, testing, training and consulting. More information about CECO and its Family of Companies is available at www.tryceco.com. ### For further information: More information about CECO and its subsidiaries is available at www.tryceco.com |
Copyright © 2006 All rights reserved. Compressor Engineering Corporation |
Use this link to be deleted or to update your email address
Compressor Engineering Corp. |
||||||||||||
