|
Hydraulic
Pushrods for White
Engines
Installation
Instructions
The
Outer Barrel on this pushrod is made to fit loosely in the hole
through the head casting. If it does not fit freely, the casting
must be ground out. The Outer Barrel has been milled flat
to help clear the oil out of the head-casting. The Lower Housing
is stabilized by the hole through the casting. The Driver
tube and the Outer Barrel should not touch each other.
Note:
Care should be taken when aligning the rocker arm, to insure that
the outside of the Driver tube and inside of the Outer Barrel do
not rub against each other.
|
