• Compressor cylinders
  
• Cylinder thermal spray upgrading, recoating and relining
  
• Compressor pistons - Reconditioned and newly manufactured
  
• Compressor rods - Rolled threads, machined threads
  
• Connecting rods
  
• Compressor valves
  
• Compressor cylinder heads
  
• Power cylinder heads
  
• Fuel valves
  
• Wiper packing cases - Reconditioned and newly manufactured cases and packing rings.
  
• Crosshead shoes and guides
  
• Complete cylinder unit refurbishing
  
• Hydraulic pushrods - Reconditioned and new manufacturing

Call 800-879-2326 or e-mail for more information

Below are just a few example of our repair procedures

Component	Repair Procedures
Power connecting rods	Compressor connecting rods True-check Micrometer inspect Clip and bore crank end Convert to full precision Wrist pin end bore oversized Furnish and install new bushing or bearings
Crossheads	True-check Micrometer inspect Rebabbit crosshead or slippers Sleeve wrist pin holes Shim and machine for oversize guides
Crosshead guides	True-check Micrometer inspect Clean and polish Bore oversize without changing original arc (radius)
Compressor pistons and rods	Clean and micrometer inspect True-check piston rod True-check piston Reclaim torque faces of piston Polish rods Manufacture new rods HVOF Colomony coat rods in packing areas Tungsten (nickel or cobalt) coat rods in packing areas Reclaim ring grooves Reclaim rider grooves and more..
Pressure and wiper cases	Stencil all pressure and wiper cups Disassemble, clean and inspect all cups Machine all pressure and wiper cups Replace nose cup seal ring Clean and lap-finish all pressure and wiper cups Machine and lap-finish or polish all flanges Final inspect and record inspection Assemble, preserve, and protect all pressure and wiper cases
Water cooled pressure cases	Stencil all pressure cups Disassemble, clean and inspect all cups Replace nose cup seal ring Machine all cups Reclaim all o-ring grooves Clean and lap-finish all pressure cups Machine and lap-finish or polish all flanges Final inspect and record inspection Furnish all necessary o-rings Water pressure test pressure case Assemble, preserve and protect pressure cases