CECO Resilon-T™ Materials
Application Bulletin
 
CECO's Polymer Products Division has teamed up with the Engineering Department to recommend the best solution for your application. Download the Application Bulletin and receive the Resilon-T™ Grade listing, description of each material and its primary uses.
 
Selecting the optimal Resilon-T™ material depends on many factors such as pressure, temperature, material of mating surface, corrosive nature of gas or gases being handled, lubrication and other operating conditions. Four new materials have been added to the CECO Polymer Products Division that are specifically designed for non-lube applications.
 
Your CECO sales representative is well qualified to assist you in choosing the ring material or combination of materials which best suits the needs of your particular application. Please feel free to discuss service requirements with us at any time.
 
 
Resilon-T Material
Resilon-T™ Grade
Description Application and Service Information
G200 White glass filled PTFE Primarily used for air and oxygen service
G205 Glass moly filled PTFE Molybdenum disulfide adds lubricity and stiffness to the material
G505 Glass graphite filled PTFE Lube/non-lube service with improved wear resistance
C333 Carbon filled PTFE Industry standard material for temperatures below 300°F and pressures under 1500 psi
C508 Carbon/PEEK filled PTFE Higher performance in low dew point applications
B400 Bronze filled PTFE For high temperature, high pressure wet air service
B450 Bronze moly filled PTFE For dry air applications and those requiring improved extrusion resistance
R700 PPS filled PTFE Polyphenylene sulfide (Ryton™) exhibits very low deformation at elevated temperature
A500 PEEK/PPS/proprietary blend Outstanding in non-lube, bone-dry applications including hydrogen and methane
New CECO Resilon-T™ Materials
A506 PPS/Carbon/proprietary Non-lube hydrocarbon applications including propylene, isobutane, carbon dioxide
C305 Carbon/graphite/proprietary Non-lube cryogenic boil-off gases including compressed natural gas
X540 Proprietary formulation Versatile non-lube/lube grade for dry hydrogen, ethylene, methane
PC405 Carbon filled PEEK/proprietary Outstanding deformation and wear resistance over 400°F either lube or non-lube
X505 PPS/proprietary Wet or dry, non-lube applications with improved performance in higher temperatures and pressures including hydrogen, propane and methane
X515 Proprietary formulation Non-lube, gaseous oxygen as well as dry argon and air applications.  Certified by Federal Institute for Materials Research and Testing (BAM).



Call 800-879-2326 or e-mail for more information